The Whole Process Of Tire Production

Apr 08, 2025

Leave a message

Half of the world's rubber is used to produce tires, which are also one of the most important parts of vehicles. Almost all common means of transportation in modern society are related to tires. So how are these black and round guys produced?
Half of the world's rubber consumption is used to produce tires, which shows the importance of tires to the rubber industry. Tires are installed on vehicles or machinery and are the only parts in contact with the ground, playing a role in bearing and buffering. It is subjected to various deformations, loads, forces, and high and low temperature effects when driving, so it must have high bearing capacity, traction performance, and buffering performance; at the same time, it is also required to have high wear resistance and flex resistance, as well as low rolling resistance and heat generation.
The production of tires is like making pasta. The first few processes (mixing, extrusion, tire bead, calendering, cutting) are all preparations, just like making dumplings and kneading steamed buns, you have to prepare the dough and stuffing first; when it comes to the molding process, just like making dumplings and kneading steamed buns, the shape of the tire is made; the vulcanization process is like the steamer for steaming steamed buns. After it has been processed for a period of time, the tire is really done. Finally, there is the quality inspection process to ensure that qualified products are entering the market.
The internal mixing process is similar to the process of kneading dough. Carbon black, natural/synthetic rubber, oil, additives, accelerators and other raw and auxiliary materials are mixed together and processed in an internal mixer to produce "rubber". The specific composition of the rubber depends on the target performance of the tire, such as traction, handling performance, road conditions and the requirements of the tire itself. The internal mixing process is mainly for the manufacture of rubber. Natural rubber, synthetic rubber and highly resistant materials are put into a strong mixer called an internal mixer and compressed into a rubber sheet, which is called Q rubber. Q rubber = natural rubber + synthetic rubber + compounding agent, and the materials and proportions of the semi-finished products used are also different.
The extrusion process is similar to the dough press. The rubber is fed into the extruder to extrude different semi-finished rubber parts, such as tread, sidewall/sprocket, shoulder pad and triangle strip, etc. The extrusion process mainly produces pure rubber semi-finished products such as treads and sidewalls. The Q rubber that has been mixed well is made into semi-finished products for molding after multiple mixing operations (the semi-finished products here refer to semi-finished products that only use rubber materials such as treads and sidewalls). These semi-finished products are pressed out by special models and have a certain cross-sectional shape.
The tire bead is made of many steel wires wrapped with rubber. The rubber used for the tire bead has special properties. After vulcanization, the rubber and steel wire can fit tightly together. This process is to wind the electroplated steel wire into the tire bead. Like the calendering process, the steel wire is sealed with rubber → the steel wire (continuous cord) is wound into the shape of the tire bead → combined with the tire bead semi-finished products such as apex rubber → the tire bead part is completed. The raw material cord (mainly nylon, polyester, and steel wire) passes through the calender and a thin layer of rubber is hung on both sides of the cord. The final semi-finished product is called cord. The calendering process is the process of sealing the rubber on the fabric and steel cord after mixing the rubber, and using the tire cord such as the carcass steel wire layer and the belt layer to make semi-finished products.
In this process, the cord will be cut into suitable widths and joints. The changes in the width and angle of the cord mainly depend on the specifications of the tire and the requirements of the tire structure design. The cutting process is to cut the semi-finished rubber roll made by calendering, and cut the semi-finished products (carcass steel wire layer, belt layer, etc.) in the shape of the rubber roll made by the calendering process according to the angle and width that meet the tire specifications.
All the semi-finished products are assembled into a green tire (unvulcanized tire, also called tire embryo) on the forming machine. After inspection, the green tire is transported to the vulcanization process. The forming process is to use the semi-finished product to form the tire embryo, and the semi-finished product made by the cutting process and the extrusion process is used to produce the tire embryo. The forming machine is divided into large-diameter and small-diameter forming machines. The forming process varies due to the difference between the large-diameter drum and the small-diameter drum, and each has its own advantages and disadvantages.
The green tire is loaded on the vulcanizer, and after a suitable time and suitable conditions in the mold, it is vulcanized into a finished tire. The vulcanized tire has the appearance of a finished tire - pattern/font and tread pattern. The vulcanization process is the process of vulcanizing the tire blank made by the molding process to produce the finished product. The mold is assembled in the vulcanizer, and then the tire blank is placed in the mold, and the finished product is made by high temperature and high pressure. The sulfur added during the mixing process can improve its elasticity and mechanical properties after high temperature and high pressure. It should be noted that the mold used in the vulcanization process has different patterns for different tires. The production of passenger car tires (PCR) mainly uses a two-piece mold, while the production of truck and bus tires (TBR) cannot use a two-piece mold because of the cuts and deep grooves. A flexible mold must be used. Because when using a flexible mold, special patterns that cannot be made in a two-piece mold can be designed, which is conducive to ensuring roundness.
In the last step of quality inspection, the tires need to undergo a series of strict quality inspections such as visual appearance inspection, uniformity inspection, dynamic balance test, X-ray inspection, etc. before they can be transported to the finished product warehouse for shipment.

Send Inquiry