Research Status And Analysis Of Tire Mold Structure

Jan 03, 2025

Leave a message

After decades of development, rubber tires have developed from two-piece molds to today's radial tire active molds, mold structures have changed from simple to complex, mold materials have changed from cast iron to cast steel, cast aluminum and alloy cast steel, and mold manufacturing processes have also developed from simple manual and mechanized processing to today's five-axis CNC processing and special machine processing.
Rubber molds are of various types and are very complex. Rubber tire molds are the most important type of rubber molds, with high specialization, commercialization, production concentration, and high technical content. Bicycles, motorcycles, cars, engineering machinery, and even airplanes, all machines that use rubber tires to travel, require a large number of rubber tire molds. Now, with the largest and most extensive automobile tire molds as the object, an overview of its development is outlined.
Tire molds are molds used for vulcanization molding of various tires. They are key equipment for producing tires and are widely used in the production of tires for automobiles, engineering machinery, bicycles, motorcycles, airplanes, etc.
Tires are important parts that affect the riding experience. The "road feel" commonly known by riders is brought to you by tires. A good tire may greatly improve your riding efficiency and comfort. Riding on uneven roads or using unsuitable tires will make you feel uncomfortable all over.
According to the structure of the tire mold, it is divided into a tire half mold and a flexible mold. The structure of the tire half mold is relatively simple, mainly including upper and lower side plates and upper and lower steel rims. The parting surface of the upper and lower side plates is on the center line of the tire pattern. The upper and lower molds are opened when the mold is working. The structure of the flexible mold is relatively complex, mainly divided into two parts: the cavity plate and the mold shell. The cavity plate is a part that directly contacts the tire blank, mainly including the pattern block, upper and lower side plates, and upper and lower steel rims; the mold shell is the guide mechanism of the mold, which is used to control the opening and closing movement of the mold. It mainly includes the middle mold sleeve, bow seat, upper cover, base, wear-resistant plate, guide strip, mounting ring, lifting block, etc. When the mold moves, the bow seat and the pattern block make radial opening and closing movements.

Send Inquiry