The tire consists of an outer tube, an inner tube and a cushion belt, which are used together with the rim. The outer tire consists of three main parts: the carcass, the tread and the bead. The carcass includes two parts: the cord layer and the buffer layer, while the outer rubber layer includes two parts: the tread rubber and the sidewall rubber.
The tread is the outer covering layer of the tire, and the tread rubber is divided into two layers: the upper cap rubber and the lower base rubber. The cap rubber directly contacts the ground, has wear resistance and cut resistance, and can transmit the traction and braking force of the wheel. The base rubber at the bottom of the pattern is used to buffer the vibration and impact transmitted from the ground, and is usually made of heat-resistant and shear-resistant rubber that is different from the cap rubber. The carcass is made of multiple layers of rubber cords bonded at a certain angle. It is a semi-rigid frame that can accommodate compressed air and has the required strength and elasticity to withstand the complex stress and deformation when the tire is used, and to mitigate external road vibration and impact. The cord layer is the skeleton of the carcass, supporting the various parts of the outer tire and fixing the outer contour of the outer tire. The buffer layer is located between the carcass cord layer and the tread, and there are two forms of cord and film. The sidewall can protect the tire body and carcass from damage and has a certain degree of flex resistance.
The purpose of the tire bead is to fix the tire tightly on the rim and withstand various forces between the outer tire and the rim. The wire ring is the basis of the tire bead and an important component of the outer tire strength. Its structure is divided into four cross-sectional forms: square, hexagonal, semicircular and circular.
The inner tube is an elastic ring hose that can stretch and fit tightly against the inner cavity of the outer tire when inflated to seal the air. It has high elasticity, tear resistance, fatigue resistance and excellent air tightness. The outer edge size of the inner tube is slightly smaller than the inner cavity of the outer tire. The thickness of each part of its cross section is different due to different use conditions such as inflation. The crown part or the contact part is often thicker than other parts. The inner wall of the tubeless tire must be lined with an airtight layer, which is equivalent to the inner tube of a tube tire. According to its structure, the valve of the inner tube can be divided into three categories: rubber metal valve (mainly used for passenger car tires), rubber cushion valve (mainly used for load-carrying tire inner tubes) and water-gas dual-purpose valve (for special vehicle inner tubes). The valve of the tubeless tire is directly fixed on the rim.
Tire is one of the important parts of the car, just like the foot of the car. In mining transportation, in terms of its transportation cost, the cost of tire consumption accounts for a large proportion, about 20% to 30% of the production and transportation cost, and the fixed cost of tires also increases with the increase of the truck load tonnage. The price of mining vehicle tires is also relatively high, accounting for 7% to 10% of the cost of the whole vehicle. Therefore, the correct use of tires can not only extend the service life of the tires, but also have important significance for ensuring driving safety and reducing transportation costs.
The temperature of the tire is extremely important for mining vehicles. Due to the load, the sidewalls are stretched and compressed, the cords inside the carcass are flexed and extended, the friction between the tread and the road surface, and the frequent braking when driving downhill cause the temperature of the tire to rise. The increase in tire temperature has a great impact on the service life of the tire. It can cause the aging of the rubber to crack, reduce its physical function, separate the cord layers, and shorten the service life. In order to prevent the tire from being damaged early due to the temperature exceeding the regulations, foreign tire manufacturers have developed a method for selecting tires according to the use conditions and the TKPH value of the tire. The TKPH value of the tire reflects the influence of various factors that cause the temperature of the tire to rise, indicates the heat generation limit of the tire, and is an indicator used to limit the working conditions of the tire. The purpose is to prevent the tire from having high temperatures during use and thus extend its service life; the load and driving speed of the tire are limited to the range that is compatible with the working capacity of the tire. Therefore, each specification of tire has a certain load speed limit, namely the TKPH value. As long as the tire is selected according to the TKPH value, the service life can be effectively extended.
